gomma-slide
gomma-5
gomma-4
gomma-3
gomma-1
gomma-2
gomma-6

The rubber

Long experience and deep know-how.

Compounds

With our historical partners – specialist in the compounds production – we develop and produce materials conforms to the most severe norm of the automotive industry, besides to certified compounds for use with drink water, gas and for contact with food.

Thanks to the deep knowledge of materials , we can produce our article with more of 500 different compounds, which belong to following families:

NR
Natural rubber

NBR
Nitrile

FKM
Fluorelastomer

FVMQ
Fluorsilicone

AU
Polyurethanic

LSR
Liquid silicone

SBR
Styrene Butadiene

HNBR
Hydrogenated Nitrile

FFKM
Perfluorelastomer

ACM
Ethylene acrylate

EU
Polyurethanic

CR
Chloroprene

EPDM
Etilene Propilene

VMQ
Silicone

AEM
Ethylene acrilic rubber

ECO
Epicloridrine rubber

 

orings

O-Rings

In Lopigom we produce O-Rings with every variant of compounds and of any dimensions between 1×0,5 and 950×15 mm, respecting the ISO norm 3601.1-B for the dimensional tolerances and the norm ISO 3601.3-N for the tolerances on defects of surface.

The high quality of our products permit us to supply O-Rings with the specific tolerances indicated by the customer. We have also equipments to mould them in all the standard dimensions for the hydraulic market with thickness 1.78 / 2.62 / 3.53 / 5.33 / 6.99.

articolo-da-disegno

Articles from drawing

In Lopigom we produce a wide range of products envisaged for every type of use: both for static and dynamic function and both for sealing support and aesthetic impact.

We produce:

MEMBRANS

FRAMES

FLAT SEALS

GASKETS

CABLE CLAMPS

SUCTION CUP

BELLOWS

TUBES

V-RINGS

X-RINGS

SEALS RING

SCRAPERS

DUST COVERS

We make also every kind of product on directly technical request of customer, both in elastomer and in liquid silicon. Every article projected on drawing is produced following the tolerances accordingly the norm ISO 3302 class M1.

costampaggio

Overmoulding

We are equipped to overmould rubber on metal and plastic pre-inserted in the mould by robot. The metal insert are accurately chosen by us from qualified and certificated suppliers which can answer to our needs and especially to the ones of our customers. The insert in plastic material are entirely produced by us.